New Construction & Build-Out — Door and Dock from Day One
Getting doors and docks right during construction saves significant money and headaches later. Wilcox works directly with GCs, developers, and project managers to spec, supply, and install commercial doors, loading dock equipment, and access systems from the ground up — on schedule, on spec, fully code compliant.
Immediate Service Request Form
One Subcontractor. Every Door. Every Dock. On Schedule.
Most construction projects involve three or four vendors just to get doors and dock equipment coordinated. Wilcox handles it all under one contract. Our project managers work directly with your site super, coordinate sequencing with other trades, pull permits, and commission every system before handover. You get one point of contact, full documentation, and a facility that’s ready to run from day one.
What We Provide
Wilcox delivers full-service door and dock solutions, union-certified installations, and site coordination for new construction and build-outs. We ensure safe, efficient, and compliant projects from start to finish.
Complete Door & Dock Packages
- Overhead sectional and rolling steel doors
- High-speed rubber and fabric doors
- Fire-rated and insulated doors
- Sliding, swing, bi-fold, and storefront doors
- Dock levelers (mechanical, hydraulic, air-powered)
- Vehicle restraints (manual, powered, interlocked)
- Dock seals, shelters, bumpers, fans, and LED dock lights
Installation by Certified Union Crews
- In-house Ironworkers from Locals 721 and 736
- Fully trained in construction site safety protocols
- Certified for working at heights, LOTO, confined space, lift operation
- Compliant with CSA, OHSA, NFPA, and ESA standards
Project Management & Site Coordination
- Full submittal and shop drawing support
- On-site measurements and layout confirmations
- Delivery logistics managed per site schedule
- Coordination with GC and related trades (framers, electricians, controls, etc.)
- Digital turnover package with all manuals, warranties, and install photos
Types of Projects We Support
We’re experienced working with complex job sites, phased schedules, and evolving scope needs. Our team ensures the right equipment is selected, arrives on time, and is installed properly to meet long-term facility demands.
New industrial builds (manufacturing, warehousing, distribution)
Cold storage and food production facilities
Retail, grocery, and shopping centre developments
Commercial and mixed-use construction
Government and institutional sites
Why Contractors Choose Wilcox
- One Vendor, Full Package – Doors, docks, operators, controls, and safety systems all handled under one roof.
- Construction-Savvy Project Management – We speak your language. Our PMs understand scheduling, scope reviews, RFI workflows, and change orders.
- Certified Installation Crews – In-house union technicians with experience on construction sites across Ontario.
- Jobsite Ready – Fleet-equipped with cranes, lifts, dock stands, and stocked materials for fast, safe installs.
- Responsive & Adaptable – We can scale up to meet tight timelines, supply last-minute changes, and resolve site conflicts quickly.
Industries We Serve
We deliver responsive door and dock repair for a wide range of facilities:
The Wilcox Difference
Wilcox provides professional door and dock repair services delivered by certified union crews, adhering to stringent safety protocols and offering dependable service trusted throughout Ontario.
Certified Union Technicians – Our repairs are conducted by in-house Ironworkers (Locals 721 & 736), ensuring quality without subcontracting.
Fully Stocked Trucks – We maintain an inventory of motors, springs, rollers, pumps, seals, and sensors to address issues on the initial visit.
Safety Protocols – Comprehensive JHAs, lockout/tagout procedures, and certifications for working at heights and in confined spaces.
Digital Service Reports – Each service includes before and after photos and detailed notes provided via email on the same day.
Emergency Repairs 24/7 – Offering on-call assistance for critical failures and after-hours emergencies.
Compatible with All Major Brands – Service available for Blue Giant, Hörmann, Poweramp, Rytec, Pentalift, Rite-Hite, and more.
Our New Construction Process — From Tender to Turnover
1. Tender & Pre-Qualification
We respond to tenders, provide references, and supply all union certification documentation that GCs and owners require. No chasing Wilcox for paperwork — it’s ready.
2. Site Measurements & Submittals
Before fabrication, we take field measurements and submit shop drawings for engineer review. Every opening is confirmed before product is ordered.
3. Material Procurement
We source from Raynor, Blue Giant, Pentalift, Rytec, and other top manufacturers — with lead times managed to fit your construction schedule.
4. Rough-In Coordination
We coordinate with the GC for rough-in framing, electrical rough-in for operators, and structural embedments for dock equipment before concrete is poured.
5. Installation by Certified Ironworkers
Our Local 721 and 736 Ironworkers install all doors, frames, hardware, operators, dock levelers, seals, shelters, and vehicle restraints to spec and code.
6. Testing, Training & Turnover Package
We test every system before handover — cycle counts, force tests, safety reversal verification. Full documentation package and owner/operator training included.
Code Compliance & Safety Standards
Every Wilcox repair is performed to meet or exceed applicable codes and manufacturer specifications. Our documentation gives you a complete compliance record for every job.
NFPA 80 — Fire Doors
Annual drop test and inspection under the Ontario Fire Code. Written compliance documentation acceptable to AHJ, insurer, and building manager.
OHSA / O. Reg. 851 — Dock Safety
All dock leveler and vehicle restraint repairs comply with Ontario OHSA loading dock safety requirements. Full lockout/tagout on every powered-equipment job.
UL 325 / CAN/CSA-C22.2 — Power Doors
Required entrapment protection and reversing sensors on all power-operated door repairs and operator replacements.
Ontario Building Code
Thermal and structural performance requirements for commercial door systems — especially cold storage and freezer door repairs.
O. Reg. 213/91 — Working at Heights
All Wilcox technicians certified under Ontario’s Working at Heights requirements for overhead door and elevated system repair work.
JHA / LOTO / WSIB
Full Job Hazard Assessment, Lockout/Tagout, and toolbox talks on every job. WSIB in good standing. Commercial general liability insurance on all work.
Brands We Service
Factory-trained and stocked for all major commercial door and dock brands. Our technicians know the equipment inside out and carry the parts to fix it right the first time.
Blue Giant
Rytec
Raynor
Pentalift
LiftMaster
Albany
TNR
Richards-Wilcox
Cornell / Cookson
Wayne Dalton
Rytec Industrial
Dynaco
Serving Ontario Facilities
Wilcox dispatches certified repair crews to commercial and industrial facilities across Ontario. Click your city for local service information.
New Construction — FAQ
Can Wilcox be included in a construction tender package?
Yes — we regularly participate in tenders for industrial, commercial, and institutional construction projects. We can provide pricing, references, union certification, and capability documentation to support your bid.
Do you handle permits for door and dock installations in new buildings?
Wilcox works with the GC or owner’s team on permit applications. We provide all required product specifications, engineering submittals, and compliance documentation.
What is the typical lead time for commercial door equipment?
Standard sectional doors typically ship in 4–6 weeks. High-speed doors and custom rolling steel can take 8–12 weeks. We manage procurement to align with your construction schedule.
Can you work on phased construction projects?
Absolutely. We’ve worked on phased builds where different sections open on different dates. We coordinate installation sequences, temporary weather protection, and phased commissioning with the GC.
Do you install fire-rated door assemblies in new buildings?
Yes. We install fire-rated rolling steel and sectional door assemblies to UL listing and NFPA 80 requirements, with all required labelling and documentation for building occupancy.
What's included in the turnover package at project completion?
Operations and maintenance manuals, warranty documentation, equipment serial numbers, commissioning records, cycle test results, and a walkthrough with the building owner or facilities team.
Can Wilcox handle a multi-location rollout for a new building portfolio?
Yes — national and multi-site rollouts are a core capability. We coordinate installation schedules, crew deployment, and documentation across multiple sites simultaneously.
Do you install HVLS fans in new construction?
Yes — HVLS fan installation is part of our new construction scope for large warehouse and distribution facilities. We coordinate rough-in, structural mounting, and electrical connections with the MEP trades.
Get Wilcox on Your Next Project
Let us quote your door and dock package — and bring safety, experience, and value to your next build.
Wilcox Door Service — Built for the Build.
Ready to Start Your Next Project?
Share your project details to receive a tailored quote. Our team will promptly follow up with pricing information and next steps to ensure seamless door and dock services.
